QUANTITY DISCOUNT / PHONE ORDER
616-741-9237

Sandblasters 3.5 Cu Ft Special Setups * * * *

$ 3,956.00

Click dropdown menu below for products

Product # / SKU:

Special set ups for 3.5 cu ft  *  *  *  *  *  *  *

Tel  (616) 741-9237   Email   biga@sandblaster-parts.com

Choose from available models above by using the drop down list (down arrow), or clicking the smaller photos.

WHEN USING STEEL ABRASIVES, ELECTRIC CONTROL HANDLE #2 (888-2263-401PB) AND SEALED CONNECTOR(S) (PB-31131) ARE REQUIRED.

Descriptions of each Sandblaster. 

888-0332-12611PB

FEATURES & BENEFITS OF SPR ELECTRIC CONTROLS 12VDC

A. 3.5 CU. FT. CAPACITY (100 LITERS)
1. 150 PSI VESSEL (10.3 BAR)
2. A.S.M.E. SECTION VIII DIVISION 1 C.R.N. FOR ALL PROVINCES
3. C.R.N. FOR ALL PROVINCES
B. PRESSURE RELEASE SYSTEM
1. AUTOMATICALLY BLOWS DOWN THE VESSEL WHEN CONTROL HANDLE IS RELEASED
2. LOW MAINTENANCE DESIGN
3. SIMPLE TROUBLE SHOOTING FOR IN FIELD REPAIRS
C. ELECTRIC CONTROLS 12VDC
1. WHEN RUNNING OVER 100 FEET OF BLAST HOSE THIS ADDS ADDITIONAL SPEED
TO STOPPING & STARTING THE BLASTING OPERATION
2. HELPS WITH FREEZING PROBLEMS IN COLD WEATHER
3. HEAvY DUTY FILTERED CONTROL VALVE REDUCES STOPPING TIME WHEN CONTROL
HANDLE IS RELEASED
D. HEAVY DUTY MOISTURE SEPARATOR
E. 1" GALVANIZED PIPING FOR CORROSION RESISTANCE
F. HEAVY DUTY FULL PORT BALL VALVES
G. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE
  1. WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE
H. BOLT CLAMPS ON PUSHER LINE MAKE FIELD REPAIRS EASIER
I. COMBINATION VALVE/MPV VALVE
  1. COMBINATION VALVE IS A 2 IN 1 DESIGN THAT WILL STOP THE AIR BLASTING
AND RELIEVES THE PRESSURE FROM THE VESSEL WHEN THE CONTROL HANDLE IS RELEASED
2. MANUAL PLUNGER VALVE (MPV) IS A SIMPLE DESIGN THAT PROVIDES A WIDE
RANGE OF ADJUSTMENT OF ABRASIVE FLOW TO THE NOZZLE
3. RELIEVING CONTROL HANDLE REDUCES AIR CONSUMPTION AND REDUCES STOPPING
TIMES WHEN CONTROL HANDLE IS RELEASED
J. MADE IN USA

 

888-0331-33601PB

FEATURES & BENEFITS OF SPH APVII PNEUMATIC

A. 3.5 CU. FT. CAPACITY (100 LITERS)
1. 150 PSI VESSEL (10.3 BAR)
2. A.S.M.E. SECTION VIII DIVISION 1
3. C.R.N. FOR ALL PROVINCES
B. PRESSURE HOLD SYSTEM
1. REDUCES ABRASIVE CONSUMPTION
2. REDUCES MOISTURE PROBLEMS
3. SMOOTHER STARTS & STOPS
C. HEAVY DUTY MOISTURE SEPARATOR
D. 1" GALVANIZED PIPING FOR CORROSION RESISTANCE
E. HEAVY DUTY FULL PORT BALL VALVES
F. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE
1. WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE
G. BOLT CLAMPS ON PUSHER LINE MAKE FIELD REPAIRS EASIER
H. NORMALLY CLOSED VALVES
1. AUTOMATIC PLUNGER VALVE II (APVII) PREMIUM ABRASIVE METERING VALVE
WITH QUADRUPLE PLUNGER SEAL ARRANGEMENT SOLVES THE AIR & ABRASIVE CARRY OVER
PROBLEM AS WELL AS THE PLUNGER & SEAL JAMMING PROBLEM NORMALLY ASSOCIATED WITH
REGULATED LOW PRESSURE BLASTING APPLICATIONS AND OR THE USE OF STEEL ABRASIVE.
SOLID MACHINED TUNGSTEN CARBIDE PLUNGER & SLEEVE PROVIDES FAR SUPERIOR WEAR
RATES AND 100% CONSISTENT TOLERANCES. 1" NPT CLEANOUT PORT GIVES ACCESS TO
OBSTRUCTIONS THAT MAY BE BRIDGING OVER THE METERING PORT ALSO ALLOWS YOU TO
DRAIN THE VESSEL WITHOUT REMOVING THE VALVE.
2. AUTO AIR VALVE FOR FAST STARTS & STOPS
3. HEAVY DUTY FILTERED CONTROL VALVE REDUCES STOPPING TIME WHEN CONTROL
HANDLE IS RELEASED
4. RELIEVING CONTROL HANDLE REDUCES AIR CONSUMPTION AND REDUCES STOPPING
TIMES WHEN CONTROL HANDLE IS RELEASED
I. BLOW DOWN MUFFLER REDUCES UNNECESSARY LOUD NOISE
J. MADE IN THE USA

888-0332-33601PB

WHEN USING STEEL ABRASIVES, ELECTRIC CONTROL HANDLE #2 (888-2263-401PB) AND SEALED CONNECTOR(S) (PB-31131) ARE REQUIRED.

 BENEFITS OF SPH ELECTRIC CONTROLS 12VDC & APVII

A. 3.5 CU. FT. CAPACITY (100 LITERS)

    1. 150 PSI VESSEL (10.3 BAR)

    2. A.S.M.E. SECTION VIII DIVISION 1 

    3. C.R.N. FOR ALL PROVINCES

B. PRESSURE HOLD SYSTEM

    1. REDUCES ABRASIVE CONSUMPTION

    2. REDUCES MOISTURE PROBLEMS

    3. SMOOTHER STARTS & STOPS

 C. ELECTRIC CONTROLS 12VDC

     1. WHEN RUNNING OVER 100 FEET OF BLAST HOSE THIS ADDS   

        ADDITIONAL SPEED TO STOPPING & STARTING THE BLASTING

        OPERATION

   2. HELPS WITH FREEZING PROBLEMS IN COLD WEATHER

D. HEAVY DUTY MOISTURE SEPARATOR<br />E. 1" GALVANIZED PIPING           FOR CORROSION RESISTANCE

F. HEAVY DUTY FULL PORT BALL VALVES

G. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE 

   1. WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE

H. BOLT CLAMPS ON PUSHER LINE MAKE FIELD REPAIRS EASIER

I. NORMALLY CLOSED VALVES

    1. AUTOMATIC PLUNGER VALVE II (APVII) PREMIUM ABRASIVE               METERING VALVE WITH QUADRUPLE PLUNGER SEAL ARRANGEMENT SOLVES THE AIR  ABRASIVE CARRY OVER PROBLEM AS WELL AS THE PLUNGER SEAL JAMMING PROBLEM NORMALLY ASSOCIATED WITH REGULATED LOW PRESSURE BLASTING APPLICATIONS AND OR THE USE OF STEEL ABRASIVE.  SOLID MACHINED TUNGSTEN CARBIDE PLUNGER  SLEEVE PROVIDES FAR SUPERIOR WEAR RATES AND 100% CONSISTENT TOLERANCES.  1" NPT CLEANOUT PORT GIVES ACCESS TO OBSTRUCTIONS THAT MAY BE BRIDGING OVER THE METERING PORT ALSO ALLOWS YOU TO DRAIN THE VESSEL WITHOUT REMOVING THE VALVE.

  2. AUTO AIR VALVE FOR FAST STARTS & STOPS

  3. HEAVY DUTY FILTERED CONTROL VALVE REDUCES STOPPING TIME     WHEN CONTROL HANDLE IS RELEASED 

WHEN USING STEEL ABRASIVES, ELECTRIC CONTROL HANDLE #2 (888-2263-401PB) AND SEALED CONNECTOR(S) (PB-31131) ARE REQUIRED.

BENEFITS OF SPH ELECTRIC CONTROLS 12VDC  

A. 3.5 CU. FT. CAPACITY (100 LITERS)

    1. 150 PSI VESSEL (10.3 BAR)

     2. A.S.M.E. SECTION VIII DIVISION 1

     3. C.R.N. FOR ALL PROVINCES

B. PRESSURE HOLD SYSTEM

     1. REDUCES ABRASIVE CONSUMPTION

     2. REDUCES MOISTURE PROBLEMS

     3. SMOOTHER STARTS & STOPS

C. ELECTRIC CONTROLS 12VDC

     1. WHEN RUNNING OVER 100 FEET OF BLAST HOSE THIS ADDS  ADDITIONAL SPEED TO STOPPING & STARTING THE BLASTING OPERATION

     2. HELPS WITH FREEZING PROBLEMS IN COLD WEATHER

D. HEAVY DUTY MOISTURE SEPARATOR

E. 1" GALVANIZED PIPING FOR CORROSION RESISTANCE

F. HEAVY DUTY FULL PORT BALL VALVES

G. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE

    1. WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE

H. BOLT CLAMPS ON PUSHER LINE MAKE FIELD REPAIRS EASIER

I. NORMALLY CLOSED VALVES

   1. AUTOMATIC PLUNGER VALVE (APV) WITH URETHANE SLEEVE FOR REGULATING THE ABRASIVE FLOW AND PROVIDING SMOOTH STARTS & STOPS

   2. AUTO AIR VALVE FOR FAST STARTS & STOPS

   3. HEAVY DUTY FILTERED CONTROL VALVE REDUCES STOPPING TIME WHEN CONTROL HANDLE IS RELEASED     

J. BLOW DOWN MUFFLER REDUCES UNNECESSARY LOUD NOISE

Related products